D-Link DFE-2600 manual Out-of-Band/ Console Configuration

Dual-Speed Stackable Hub Web-based Management User’s Guide

♦Group Role The role of the Hub within the stack, either pri- mary-master, backup-master, or slave.

♦Hardware Revision The version of the repeater hardware board used in this Hub.

♦Status Tells whether the Hub is up (online and working) or down.

♦Last Operation Status Change Time of the last status change for the Hub. A status change occurs when the Hub goes online or offline.

♦Isolated/ Reconnected Group This is an option to isolate or reconnect the Hub to the hub stack.

Out-of-Band/ Console Configuration

Clicking on the word Console which will appear on the representation of the hub stack if a console is present, allows the Hub diagnostic port to be con- figured. The diagnostic port can be set to Console (in-band) for VT-100 and terminal emulation which may be necessary for basic configurations and initial setup, or to out-of-bandmanagement which enables the hub to be managed using SNMP via the diagnostic port.

86 Web-based Network Management