auth-trap enable/disable

Enables or disables authentication failure traps for invalid SNMP com- munity names. The argument for this field is either enable or disable.

clear-SNMP-comm-table

Clears the hub SNMP community name table.

SNMP-communitycommunity permissions

Adds a community to the hub list of SNMP communities, with access permissions. Four entries is the maximum allowed. The community name can be up to 32 characters long. Permissions can be read for read- only community access, or write for read-write community access.

clear-ip-trap-manager-table

Deletes all entries from the hub trap manager list.

ip-trap-manageraddress community

Adds the host at address to the hub SNMP trap manager list. Four entries is the maximum allowed. Traps sent to the host will use the com- munity name variable community, which may be up to 32 characters long.

telnet-idle-time n

Sets the hub maximum allowed console interface idle time to n minutes.

node-age-time n

Boot Configuration File

117

Page 129
Image 129
D-Link DFE-2600 manual Boot Configuration File 117