D-Link DFE-2600 manual Send BOOTP Request Upon Power Up. This parameter determines

Dual-Speed Stackable Hubs User’s Guide

be 255.0.0.0 for a Class A network, 255.255.0.0 for a Class B net- work, and 255.255.255.0 for a Class C network.

♦Default Gateway. This parameter specifies the IP address for a gateway or a router where frames with destinations outside the current subnet should be sent. If your network is not part of an internetwork, or you do not want the hub to be accessible outside your local net- work, you can leave this field blank.

♦Send BOOTP Request Upon Power Up. This parameter determines

whether or not the hub should send out a BOOTP request when it is powered up. The BOOTP protocol allows IP addresses, network masks, and default gateways to be assigned from a central BOOTP

server; if this option is set to es,” the hub will first look for a BOOTP server to provide it with this information before using local settings.

DFE-2600 Stackable Hub - TCP/IP Parameters Configuration Menu

Interface #<1	Media Type: Ethernet>
Current Setting
IP Address:	210.68.85.51
Subnet Mask:	255.255.255.0
Default Gateway:	210.68.85.126

System Restart Setting
IP Address	[210.68.85.51	]
Subnet Mask	[255.255.255.0	]
Default Gateway	[210.68.85.126	]

Send BootP Request Upon Power Up <No >

HELP SAVE EXIT

The default setting for all TCP/IP variables is 0.0.0.0.

46 Master Hub Setup and Management