D-Link DFE-2600 manual System Name. This parameter corresponds to the MIB-II object

Dual-Speed Stackable Hubs User’s Guide

requests, allowing them to be used for network management purposes. Each of these fields is restricted to 64 characters:

♦System Name. This parameter corresponds to the MIB-II object

sysName, and is used to assign a name to the hub for administrative purposes. The hub domain name is often used, provided a name has been assigned.

♦System Location. This parameter corresponds to the MIB-II object sysLocation, and is used to indicate the physical location of the hub for administrative purposes.

♦System Contact. This parameter corresponds to the MIB-II object sysContact, and is used to note the name and contact information of the person responsible for administering the hub.

♦Display Timeout. An additional setting, the console time-out, may be used to automatically log out the console interface after a predetermined period of inactivity. This feature increases hub security by preventing ac- cess to the hub after the interface has been inadvertently left logged on. A setting of 0 disables this feature.

DFE-2600 Stackable Hub - System Configuration Menu

Mgmt Hardware Revision:	Rev. 01
Boot PROM Firmware Version:	Ver.	2.22
Software Version:	Ver.	2.04
MAC Address:	0080C80D308C

System Description:
D-Link Corp. DFE-2600 Dual Speed Stackable Hub SNMP/
System Name	[			]
System Location	[			]
System Contact	[			]
Console/Telnet Display Timeout in Minutes			[60	]
	HELP	SAVE	EXIT

50 Master Hub Setup and Management