D-Link DFE-2600 manual To log in, complete these steps

Dual-Speed Stackable Hubs User’s Guide

DFE-2600 Dual speed Stackable Hub Telnet Remote Management Ver0

Copyright(C) 1995-96 D-Link Corp.

User Name	[	]
Password	[	]

OK CLOSE CONNECTION

To log in, complete these steps:

1.Type in your user name and press <Enter>.

2.Type in your password and press <Enter>.

3.With the cursor on the OK selection, press <Enter>.

NOTE: When the hub is shipped, the default user name is D-Link, and the default password is also D-Link. You will need to use this user name and password when you first set up your hub or if you use the Factory Reset NVRAM to Default Value menu selection. Change this user name and password to protect the se- curity of your hub.

There are two levels of user privilege: Super User and General User. The default user (D-Link) has Super User privileges. Some functions available to Super Users are not available to General Users. The main menu below is the menu for Super Users:

42 Master Hub Setup and Management