D-Link DFE-2600 manual Module Port Slots 1&2 Configuration, System Restart Out-of-Band Baud Rate

Dual-Speed Stackable Hub Web-based Management User’s Guide

♦Protocol This is the protocol used by the Hub for out-of-band (dial-up) management.

♦	System Restart Out-of-Band Baud Rate	This sets the baud rate (cps)
	on the Hub.
♦	Out-of-Band Dial Up Phone Number	Administrator can place num-
	ber here for reference.

Module Port (Slots 1&2) Configuration

When slots 1 or 2 are occupied by either a DFE-260FX Fiber Optic Module (shown on the graphic representation of the hub as SwFx) or a DFE-260TX Fast Ethernet Module (SwTp), clicking on the words SwFx or SwTp causes the following configuration screen to be shown.

Information displayed includes:

♦Port Type This item shows either Sw-Txfor a Fast Ethernet module or Sw-Fiberfor the Fiber Optic module.

♦Link Status Indicates link status: online and running (link up) or not (link down).

♦Speed Indicates the port speed: 100Mbps or 10Mbps.

88 Web-based Network Management