Chapter 7

Checking Inside the Computer

This chapter provides troubleshooting procedures for components inside the computer. Before you start any of the procedures in this chapter, do the following:

Perform the procedures described in “Checking Con- nections and Switches” and “The System Setup Program” in Chapter 2.

Read the safety instructions in “Safety First—For You and the Computer” next in this chapter.

You need the following items to perform the procedures in this chapter:

Safety FirstFor You and the Computer

WARNING: The power supplies in this computer system produce high voltages and energy hazards, which can cause bodily harm. Only trained service technicians are authorized to remove the computer covers and access any of the components inside the computer.

The Dell Server Assistant CD

The system documentation

A #2 Phillips-head screwdriver (or 1/4-inch hex-nut driver)

The key to the system keylocks

NOTE: When you see the question, “Is the problem resolved?” in a troubleshooting procedure, perform the opera- tion that caused the problem.

The procedures in this chapter require that a trained ser- vice technician remove the covers and work inside the computer. While working inside the computer, do not attempt to service the computer except as explained in this guide and elsewhere in Dell documentation. Always follow the instructions closely.

WARNING: Before a trained service technician accesses the inside of the computer, any and all power supplies must be disconnected from their power source, and the cables to the power supplies must also be disconnected. If this computer has more than one power supply, disconnect both power supply cords before servicing to avoid electrical shock.

Checking Inside the Computer

7-1

Page 57
Image 57
Dell 6100, 200 manual Checking Inside the Computer, Safety First- For You and the Computer