Figure 7-2. Removing the Computer Covers
Replacing the Computer Covers
Use the following procedure to replace a computer cover:
1.Check all cable connections, especially those that might have come loose during your work. Fold cables out of the way so that they do not catch on the computer cover.
CAUTION: Make sure that there are no cables or cable connectors lying on the top diskette drive in the upper drive cage. Foreign objects on top of the drive can interfere with drive operation and permanently damage the drive.
screws (6)
2.Check that no tools or extra parts (including screws) are left inside the computer.
3.Make sure the applicable keylock is in the unlocked position.
4.Fit the cover over the side rail at the bottom of the chassis, and slide it closed.
5.Secure the cover with the three screws.
6.Set the keylock to the locked position.
Checking Inside the Computer |
