Installing an Expansion-Card Riser

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1To install an expansion-card riser, align the riser guides with the riser guide posts on the system board. See Figure 3-18.

2Lower the expansion-card riser into place until the expansion-card riser connector is fully seated.

3If applicable, reinstall the expansion card. See "Installing an Expansion Card" on page 113.

4Reinstall the storage controller card. See "Installing the Storage Controller Card" on page 121.

5Reconnect all cables.

6Replace the cooling shroud. See "Installing the Cooling Shroud" on page 87.

7Close the system. See "Closing the System" on page 85.

8Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.

118

Installing System Components

Page 118
Image 118
Dell R515 owner manual Installing an Expansion-Card Riser, 118