RAID Battery (Optional)
Removing the RAID Battery
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
NOTE: The information in this section applies only to systems with the optional RAID controller card.
1Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2Open the system. See "Opening the System" on page 83.
3Disconnect the RAID battery cable by gently pulling the cable connector out of the connector. See Figure
4Pull back gently on the two tabs holding the RAID battery and lift the RAID battery from the battery carrier. See Figure
Figure 3-26. Removing and Installing the RAID Battery
12
3
4
1 | battery carrier | 2 | battery cable |
3 | RAID battery | 4 | battery carrier tabs (2) |
136
Installing System Components