Code | Text | Causes | Corrective Actions |
E1410 System Fatal | Specified processor has an |
Error | internal error. The error |
detected. | may or may not have |
| been caused by |
| the processor. |
Remove AC power to the system for 10 seconds and restart the system.
If the problem persists, see "Getting Help" on page 187.
E1414 | CPU # temp | Specified processor is out | Ensure that the processor |
| exceeding | of acceptable | heat sinks are properly |
| range. | temperature range. | installed. See |
| Check CPU |
| "Troubleshooting |
| heatsink. |
| Processors" on page 174 |
|
|
| and "Troubleshooting |
|
|
| System Cooling |
|
|
| Problems" on page 163. |
|
|
|
|
E1418 | CPU # not | Specified processor is | Ensure that the specified |
| detected. | missing or bad, | processor is properly |
| Check CPU | and the system is in an | installed. See |
| is seated | unsupported | "Troubleshooting |
| properly. | configuration. | Processors" on page 174. |
E141C | Unsupported | Processors are in an | Ensure that your |
| CPU config. | unsupported | processors match and |
| Check CPU or | configuration. | conform to the type |
| BIOS revision. |
| described in the processor |
|
|
| technical specifications |
|
|
| outlined in your system’s |
|
|
| Getting Started Guide. |
|
|
|
|
E141F | CPU # protocol | The system BIOS | Remove AC power to the |
| error. Power | has reported a processor | system for 10 seconds and |
| cycle AC. | protocol error. | restart the system. |
If the problem persists, see "Getting Help" on page 187.
30
About Your System
