LCD Status Messages (Optional)

NOTE: This section is applicable only to eight–hard-drive systems.

The system's control panel LCD provides status messages to signify when the system is operating correctly or when the system needs attention.

The LCD lights blue to indicate a normal operating condition, and lights amber to indicate an error condition. The LCD scrolls a message that includes a status code followed by descriptive text. The table that follows provides a listing of LCD status messages and the probable cause for each message. The LCD messages refer to events recorded in the system event log (SEL). For information on the SEL and configuring system management settings, see the systems management software documentation.

NOTE: If your system fails to boot, press the System ID button for at least 5 seconds until an error code appears on the LCD. Record the code, then see "Getting Help" on page 187.

Code

Text

Causes

Corrective Actions

 

 

 

 

N/A

SYSTEM NAME

A 62-character string that

This message is for

 

 

can be defined by the user

information only.

 

 

in the System Setup

You can change the

 

 

program.

 

 

system ID and name in

 

 

The SYSTEM NAME

 

 

the System Setup

 

 

displays under the

program. See "Using the

 

 

following conditions:

System Setup Program

 

 

• The system is

and UEFI Boot Manager"

 

 

on page 57.

 

 

powered on.

 

 

 

 

 

• The power is off and

 

 

 

active errors are

 

 

 

displayed.

 

 

 

 

 

E1000

Failsafe

Check the system

Remove AC power to the

 

voltage

event log for critical

system for 10 seconds and

 

error.

failure events.

restart the system.

 

Contact

 

If the problem persists,

 

support.

 

see "Getting Help" on

 

 

 

page 187.

About Your System

27

Page 27
Image 27
Dell R515 owner manual LCD Status Messages Optional, Code Text Causes Corrective Actions