PCI IRQ Assignments Screen
Option | Description | |
|
| |
Embedded | Use the <+> and | |
Adapter | for a given device, or select Default to allow the BIOS to | |
(IRQ 5 default) | select an IRQ value at system startup. | |
Slot 2: | Use the <+> and | |
Adapter | for a given device, or select Default to allow the BIOS to | |
(IRQ 11 default) | select an IRQ value at system startup. | |
Slot 3: | Use the <+> and | |
PCI Adapter | for a given device, or select Default to allow the BIOS to | |
(IRQ 5 default) | select an IRQ value at system startup. | |
Slot 3: | Use the <+> and | |
PCI Adapter | for a given device, or select Default to allow the BIOS to | |
(IRQ 11 default) | select an IRQ value at system startup. | |
| ||
Serial Communication Screen | ||
|
| |
Option | Description | |
|
| |
Serial Communication | Selects whether the serial communication devices | |
(On without Console | (Serial Device 1 and Serial Device 2) are enabled in | |
Redirection default) | BIOS. BIOS console redirection can also be enabled and | |
| the port address used can be specified. | |
| Options are On without Console Redirection, On with | |
| Console Redirection via COM1, On with Console | |
| Redirection via COM2, and Off. | |
Serial Port Address | Sets the serial port addresses for the two serial devices. | |
(Serial Device 1=COM1, | NOTE: Only Serial Device 2 can be used for Serial Over | |
Serial Device 2=COM2 | LAN (SOL). To use console redirection by SOL, configure | |
default) | ||
the same port address for console redirection and the | ||
| ||
| serial device. | |
External Serial Connector | Specifies whether Serial Device 1, Serial Device 2, | |
(Serial Device1 default) | or Remote Access Device has access to the | |
| external serial connector. | |
NOTE: Only Serial Device 2 can be used for SOL. To use console redirection by SOL, configure the same port address for console redirection and the serial device.
Using the System Setup Program and UEFI Boot Manager
65
