Dell R515 owner manual Installing the Control-Panel Module-LED, 139

Installing the Control-Panel Module–LED

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1Assemble the power button and power button board in the control-panel module.

2Tighten the screw to secure the power button board to the control-panelmodule. See Figure 3-27.

3Connect the control-panel cable to the control-panel module.

4Replace the bracket and tighten the single screw to secure the bracket to the back of the control-panel module.

5Reconnect the system to the power source and turn on the system and attached peripherals.

6If applicable, replace the front bezel. See "Installing the Front Bezel" on page 83.

Installing System Components

139