Message | Causes | Corrective Actions |
Memory set to | The memory frequency may |
minimum | be intentionally set lower for |
frequency. | power conservation. |
| The current memory |
| configuration may support |
| only the minimum frequency. |
If not an intentional setting, check any other system messages for possible causes.
Ensure that your memory configuration supports the higher frequency.
See "General Memory Module
Installation Guidelines" on page 105.
Memory tests | POST memory test was | Information only. | |
terminated by | terminated by pressing the |
| |
keystroke. | spacebar. |
| |
MEMTEST lane | Invalid memory | Ensure that the memory | |
failure | configuration. Mismatched | modules are installed in a | |
detected on x | memory modules are | valid configuration. | |
installed. | See "General Memory | ||
| |||
|
| Module | |
|
| Installation Guidelines" on | |
|
| page 105. |
No boot device | Faulty or missing optical |
available. | drive subsystem, hard drive, |
| or hard drive subsystem, or |
| no bootable USB key |
| installed. |
Use a bootable USB key, optical drive, or hard drive. If the problem persists, see "Troubleshooting an Optical Drive" on page 168, "Troubleshooting a USB Device" on page 158, "Troubleshooting an Internal USB Key" on page 167, and "Troubleshooting a Hard Drive" on page 169.
See "Using the System Setup Program and
UEFI Boot Manager" on page 57 for information on setting the order of boot devices.
46
About Your System
