Figure 3-5. Removing and Replacing the System Cover (Twelve–Hard-Drive System)
2
1
1 | system cover latch | 2 | latch release lock |
Closing the System
1Lift the latch on the system cover.
2Place the cover onto the chassis and offset it slightly back so that the two hooks on the back edge of the cover fit the corresponding tabs on the back edge of the chassis. See Figure
3Slide the cover towards the front of the chassis and press down the latch.
4Rotate the latch release lock in the clockwise direction to secure the cover.
5Reconnect the system and peripherals to their electrical outlets, and turn on the system.
Installing System Components
85
