Message | Causes | Corrective Actions |
|
|
|
BIOS | System is in manufacturing | Reboot to take the system |
MANUFACTURING | mode. | out of manufacturing mode. |
MODE detected. |
|
|
MANUFACTURING |
|
|
MODE will be |
|
|
cleared before |
|
|
the next boot. |
|
|
System reboot |
|
|
required for |
|
|
normal |
|
|
operation. |
|
|
BIOS Update | Remote BIOS update | Retry the BIOS update. |
Attempt Failed! | attempt failed. | If problem persists, |
|
| see "Getting Help" on |
|
| page 187. |
Caution! | NVRAM_CLR jumper is |
NVRAM_CLR jumper | installed in the clear setting. |
is installed on | CMOS has been cleared. |
system board. |
|
Please run SETUP |
|
Move the NVRAM_CLR jumper to the default position (pins 3 and 5). See Figure
CPU set | to | The processor speed may be | If not an intentional setting, |
minimum |
| intentionally set lower for | check any other system |
frequency. | power conservation. | messages for possible causes. | |
CPU x installed | Memory modules are | Install memory modules for | |
with no | memory. | required but not installed in | the processor. See "System |
|
| the indicated processor’s | Memory" on page 104. |
|
| memory slots. |
|
42
About Your System
