Installing the Control Panel Assembly
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1Install the control panel board in the system chassis and secure it with the two screws. See Figure
2Connect the display module cable to the control panel board. See Figure
3Connect the control panel cable to the control panel board. See Figure
4Connect the USB cable to the control panel board. See Figure
5Close the system. See "Closing the System" on page 85.
6Reconnect the system to the power source and turn on the system and attached peripherals.
SAS Backplane
Removing the SAS Backplane
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1If applicable, remove the front bezel. See "Removing the Front Bezel" on page 82.
2Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
Installing System Components
