Figure 59. Removing and installing 2.5 inch (x32) SAS/SATA backplane with a single PERC card
1. | signal cable to backplane 2 | 2. | release pin |
3. | power cable to backplane 2 | 4. | SAS cable to backplane 2 |
5. | signal cable to backplane 1 | 6. | power cable to backplane 1 |
7. | SAS cable to backplane 1 | 8. | power connector on backplane 1 |
9. | x16 backplane 1 | 10. | SAS connector on backplane 2 |
11. | x16 backplane 2 | 12. | power connector on backplane 2 |
130
