Menu Item | Description |
|
|
| When |
| enabled, ISC is executed during POST on detecting |
| relevant change(s) in the system configuration. |
| This helps in optimizing the system power and |
| performance. ISC takes about 20 seconds to be |
| executed, and system reset is required for ISC |
| results to be applied. The Enabled - No Reboot |
| option executes ISC and continues without |
| applying ISC results until the next time system |
| reset occurs. The Enabled option executes ISC and |
| forces an immediate system reset so that ISC |
| results can be applied. It takes the system longer to |
| be ready due to the forced system reset. When |
| disabled, ISC is not executed. |
About Boot Manager
Boot Manager enables you to add, delete, and arrange boot options. You can also access System Setup and boot options without restarting the system.
Entering Boot Manager
The Boot Manager screen enables you to select boot options and diagnostic utilities.
1.Turn on, or restart your system.
2.Press F11 when you see the message F11 = Boot Manager.
If your operating system begins to load before you press F11, allow the system to finish booting, and then restart your system and try again.
Boot Manager main menu
Menu Item | Description |
|
|
Continue Normal Boot | The system attempts to boot to devices starting |
| with the first item in the boot order. If the boot |
| attempt fails, the system continues with the next |
| item in the boot order until the boot is successful |
| or no more boot options are found. |
One Shot Boot Menu | Takes you to the boot menu, where you can select |
| a one time boot device to boot from. |
Launch System Setup | Enables you to access System Setup. |
Launch Lifecycle Controller | Exits the Boot Manager and invokes the Lifecycle |
| Controller program. |
42
