1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
3.Remove the cooling shroud. For more information, see Removing the cooling shroud.
4.Remove the expansion card holder. For more information, see Removing the expansion card holder.
5.Open the two expansion card latches.
6.Remove the filler brackets. For more information, see Removing a GPU card
NOTE: Keep this bracket in case you need to remove the expansion card. Filler brackets must be installed in empty
Steps
1.Locate the x16 slot on the system board.
2.Insert the GPU card into the slot.
3.Connect the cables to the GPU card.
4.Close the two expansion card latches.
Next steps
1.Install the expansion card holder.
2.Install the cooling shroud.
3.Follow the procedure listed in After working inside your system.
Internal dual SD module
The Internal Dual SD Module (IDSDM) card provides two SD card slots. This card offers the following features:
•Dual card operation — maintains a mirrored configuration by using SD cards in both the slots and provides redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of System Setup, the information is replicated from one SD card to another.
•Single card operation — single card operation is supported, but without redundancy.
Removing the internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Ensure that you read the Safety instructions.
2.Follow the procedure listed in Before working inside your system.
94
