Dell T630 owner manual Installing a 3.5 inch hard-drive blank

Steps

Press the release button and slide the blank out of the hard-drive slot.

Figure 22. Removing and installing a 3.5 inch hard-drive blank

1. hard-drive blank 2. release button

Next steps

If applicable, install the front bezel.

Installing a 3.5 inch hard-drive blank

Prerequisites

1.Ensure that you read the Safety instructions.

2.If installed, remove the front bezel.

Steps

Insert the hard-drive blank into the hard-drive slot until the release button clicks into place.

Next steps

If applicable, install the front bezel.

Installing a 2.5 inch hard drive into a 3.5 inch hard-drive adapter

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Keep the #2 Phillips screwdriver ready.

2.Ensure that you read the Safety instructions.

74