![](/images/new-backgrounds/1268250/268250201x1.webp)
Figure 36. Removing and installing a processor |
|
| |
1. | close first | 2. | |
3. | processor | 4. | slot (4) |
5. | processor shield | 6. | open first |
7. | socket | 8. | socket keys (4) |
d.Hold the tab on the processor shield and lift the processor shield until the open first socket- release lever lifts up.
CAUTION: The socket pins are fragile and can be permanently damaged. Be careful not to bend the pins in the socket when removing the processor out of the socket.
e. Lift the processor out of the socket and leave the open first
NOTE: If you are permanently removing the processor, you must install a socket protective cap in the vacant socket to protect the socket pins and keep the socket free of dust.
NOTE: After removing the processor, place it in an
Next steps
1.Replace the heat sink(s) and processor(s). See Installing a processor.
2.Follow the procedure listed in After working inside your system.
101