Dell T630 owner manual Network Settings screen, Integrated Devices screen details

Menu Item	Description
Boot Mode	Enables you to set the boot mode of the system.
	CAUTION: Switching the boot mode may prevent the system from
	booting if the operating system is not installed in the same boot
	mode.
	NOTE: Setting this field to UEFI disables the BIOS Boot Settings
	menu. Setting this field to BIOS disables the UEFI Boot Settings
	menu.
	If the operating system supports UEFI, you can set this option to UEFI.
	Setting this field to BIOS allows compatibility with non-UEFI operating
	systems. By default, the Boot Mode option is set to BIOS.
Boot Sequence Retry	Enables or disables the Boot Sequence Retry feature. If this field is
	enabled and the system fails to boot, the system reattempts the boot
	sequence after 30 seconds. By default, the Boot Sequence Retry option
	is set to Enabled.
Hard-Disk Failover	Specifies which devices in the Hard-Disk Drive Sequence are attempted
	in the boot sequence. When the option is set to Disabled, only the first
	hard disk device in the list is attempted to boot. When set to Enabled, all
	hard disk devices are attempted in the order, as listed in the Hard-Disk
	Drive Sequence. This option is not enabled for UEFI Boot Mode.
Boot Option Settings	Configures the boot sequence and the boot devices.

Network Settings screen

You can use the Network Settings screen to modify PXE device settings. Network Settings are only available in UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. For BIOS boot mode, the network settings are handled by the network controllers option ROM.

To view the Network Settings screen, click System Setup Main Menu → System BIOS → Network Settings.

Menu Item	Description
PXE Device n (n = 1 to 4)	Enables or disables the device. When enabled, a UEFI boot option is
	created for the device.

PXE Device n Settings (n = 1 Allows you to control the configuration of the PXE device. to 4)

Integrated Devices screen details

Integrated Devices screen allows you to view and configure the settings of all integrated devices including the video controller, integrated RAID controller, and the USB ports.

In the System Setup Main Menu, click System BIOS → Integrated Devices.

The Integrated Devices screen details are explained below.

35