Dell T630 owner manual Installing the cooling-fan assembly optional

Figure 15. Removing and installing the cooling-fan assembly

1.	cooling-fan assembly	2.	cooling fan (4)
3.	release lever (2)	4.	slot (3)

5.guide pin (3)

Installing the cooling-fan assembly (optional)

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

CAUTION: Ensure that the cables are correctly installed and retained by cable retention bracket before installing the cooling-fan assembly. Incorrectly installed cables may get damaged.

Ensure that you read the Safety instructions.

Steps

1.Align the slots on the cooling-fan assembly with the guide pins on the chassis side walls.

2.Slide the cooling-fan assembly into the chassis.

3.Lock the cooling-fan assembly into the chassis by pressing the release levers down.

Next steps

Follow the procedure listed in After working inside your system.

58