NOTE: If you assign a new system and/or setup password with the jumper on pins 4 and 6, the system disables the new password(s) the next time it boots.
5.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
6.Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
7.Remove the system cover.
8.Move the jumper on the
9.Install the system cover.
10.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
11.Assign a new system and/or setup password.
172
