Dell T630 owner manual Inch hard drive Inch hard-drive adapter Screw

Steps

1.Align the screw holes on the 2.5 inch hard drive with the screw holes on the 3.5 inch hard-drive adapter.

2.Install the screws to secure the hard drive to the hard-drive adapter.

Figure 23. Removing and Installing a 2.5 inch hard drive into a 3.5 inch hard-drive adapter

1.	2.5 inch hard drive	2. 3.5 inch hard-drive adapter
3.	screw (2)

Removing a 2.5 inch hard drive from a 3.5 inch hard-drive adapter

Prerequisites

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

1.Ensure that you read the Safety instructions.

2.Keep the #2 Phillips screwdriver ready.

NOTE: A 2.5 inch hard drive is installed in a 3.5 inch hard-drive adapter, which is then installed in the 3.5 inch hard-drive carrier.

Steps

1.Remove the screws from the side of the 3.5 inch hard-drive adapter.

2.Remove the hard drive from the hard-drive adapter.

75