Dish Network 512 manual Remote Controls

Remote Controls

TV Antenna/Cable In

The TV ANTENNA/CABLE IN is used if you want the satellite receiver to connect the tuner of the nearby TV to an over-the-air antenna or cable-TV distribution system when the satellite receiver is turned off or when using the TV/VIDEO button on the remote control. Use a coaxial cable to make this connection to an over-the-air (OTA) antenna or cable-TV system. The TV ANTENNA/CABLE IN connection is color-coded black. Your TV must be connected to the CHANNEL 3-4output to use this feature.

TV2 Connections

Do not use any TV2 connections to connect to your TV. These connections are inactive.

Other Connections

Satellite In

The SATELLITE IN connections are used to receive satellite TV signals from the dish antenna. The connection is made using RG-6 coaxial cable. The SATELLITE IN connections are color-coded blue.

Note: Both SATELLITE IN connections must be used for proper operation of this dual-tuner receiver. You may use a DISH Pro Plus input-signal separator.

Remote Antenna (for optional accessory)

The REMOTE ANTENNA port receives UHF Pro signals from an optional IR/UHF Pro remote control so that it can control menus and programming from another room. Connect this antenna here, and place it so that it does not touch anything. If you do not connect the antenna, you cannot use a UHF-enabled remote to control the receiver’s

menus and programming. The REMOTE ANTENNA port is color-coded green.

Telephone Jack

The TELEPHONE JACK is used to connect the receiver to an active telephone line. Use a standard RJ-11 telephone cable assembly to make the connection. You must keep the receiver connected to an active telephone line. Otherwise, you may not be able to order pay-per-view programs, use all of the DISH

Interactive features, or access other customer services from DISH Network.

Remote Controls

Remote controls give you easy access to all the features of your satellite receiver. You can set up a DISH Network four-component remote to control the

Tip: If you connect a cable to the TV/ Antenna In port, attach the black cable sticker to the cable near where it attaches to the receiver. The stickers are located inside the front cover of this guide.

Page 21