Chapter 3
Using the System
Tip: Limited mode is not used with audio amplifiers, tuners, or accessories. Limited Mode applies to a second TV, VCR or DVD player you set up in AUX mode.
Set Up the Remote Control
1.Turn the device on.
2.Find the brand name of the device in the tables starting on page 109.
3.Press and hold the device mode button until all the other mode buttons light up, and then release the button.
The mode button flashes.
If you are repeating this procedure to program a combination device, be sure to press the correct mode button (for example, if you have a TV/VCR combination and you have already programmed the remote to control the TV, press and hold the VCR mode button, as described above).
4.For AUX mode setup only:
•Press 0 for a second TV.
•Press 1 for a second VCR or DVD player.
•Press 2 for a tuner or audio amplifier.
5.Enter one of the
6.If you want to program limited mode, press 1. If not, skip to step 7.
7.Press the POUND (#) button.
8.Press the POWER button to turn off the device. If the device does not turn off, go to step 10.
Use the device’s front panel buttons or its remote control.
If the brand isn’t listed, see Scan for Device Codes on page 87.
For example, hold the TV mode button for a TV until all of the other mode buttons light. When you release the button, the TV mode light will flash.
This step is for programming the kind of device that is to be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.
The
See Limited Mode on page 85 for more information .
If you entered the code correctly, the mode button flashes three times.
If the code is working, then the device should turn off. Also, if you’re programming TV mode, the TV POWER button on the remote control should be able to turn off your TV from any device mode.
Page 86
