–Stop Recording Manually - The receiver will record until you press STOP. Note that failing to press STOP could continue recording and fill the DVR hard drive!
–Extend End Time - You can set the stop time for the recording.
–Create a Recurring Timer - You can set up a timer like the one described in Setting Up an Automatic Event Timer on page 57.
–Record the Entire Event - The receiver stops the recording at the scheduled end of the current program or event.
Setting Up an Automatic Event Timer
1.Find a future program by using the Browse Banner, the Themes menu, or the Program Guide.
The program can be on a
2.Select a Timer Frequency option. See “Event Timer Frequency” on page 55. Notice that a mark displays in the box next to your selection.
3.Select a Timer Type. See “Event Timer Types” on page 55. Again, your selection is indicated on the screen.
4.Select any applicable timer Options; to change priority, select Set Priority.
5.Select the Create Timer option to save the new event timer.
6.The Program Guide displays a small indicator of which of the two tuners in your satellite receiver is scheduled to record the event.
Setting Up a Manual Event Timer
1.Press the MENU button and select Daily Schedule.
2.Select the Timers option.
3.Select the Manual Timers option. The receiver displays a timer menu.
Using Timers
Tip: You can edit and delete timers from any TV that is connected to one of the TV1 outputs.
Tip: The IR remote control is used to control the menus and programming on the nearby TV.
An optional IR/UHF Pro remote is available separately, and can control the receiver from another room.
Page 57
