Dish Network 512 manual Quick Tour of Watching One Program While Recording Others

Chapter 1

Introduction

Quick Tour of Watching One Program While

Recording Others

The steps below show one of many ways to watch one program while recording another.

1. Press GUIDE to open the Program Guide. Find a program you want to watch now.

2.Press SELECT to watch that program.

3.Press the RECORD button.

4.Select OK.

5.Press GUIDE on the remote. Use the Program Guide to find another program that you want to watch now. Select that program. You are now watching one program while recording another.

6.Press RECORD and select OK when the pop-up message displays. You are now recording two programs at the same time.

7.Press DVR on the remote control. The DVR Events screen will open. You should see the two programs that are recording indicated by the red dot next to the listings.

8.Select a program that you recorded in an earlier quick tour (that is, one that is not recording now), and then select Start.

9.You should now be watching a pre-recorded program while the receiver is recording the other two events (programs).

Page 16