![](/images/new-backgrounds/1278409/27840961x1.webp)
Changing the TV1 Output Channel
3.Press
4.Press the POUND (#) button. The TV mode button flashes three times.
Changing the TV1 Output Channel
The receiver comes preset to use channel 3 for TV1 coaxial output. If you are experiencing interference on the channels you are using, follow these instructions to change the channel that TV1 uses.
Make sure you are familiar with how to change channels on your TV and if necessary how to switch your TV between
1. Press
Tip: When you save the change to your modulator output channel, always remember to change the channel on the nearby TV to match.
2.For the TV 1 Out, highlight the number under Channel.
3.Use the UP and DOWN ARROW buttons to change the modulator channel either 3 or 4.
4.Select Done to save the changes.
5.Change the channel on connected TV(s) to match the channel you selected.
6.If desired, to remind you of which TV channel to tune to get satellite programming, place a channel sticker near or on your TV to indicate the correct channel.
Connecting the Receiver to the Phone Line
You must keep the receiver connected to an active telephone line. Otherwise, you may not be able to order
Tip: The channel
stickers are located inside the front cover of this guide.
Page 27