Installing a Multiple Dish DISH Pro System
12.Connect two
13.Select Check Switch from the Point Dish menu. When the Check Switch menu opens, select Retest. When the procedure completes, you will see the Installation Summary screen again. This time you should see confirmation for all satellites your dishes are pointed at, and “Satellite reception verified.” You should also see that the switch(es) in your system has been correctly identified.
Refer to the DISH Pro wiring diagrams for examples of installation summary screens.
14.Press CANCEL to exit this menu, and then Done to exit the Point
Dish screen. If you have any other receivers in your system, make sure you run Check Switch on each of them, and allow each to take the software upgrade, as needed.
Page 93
