Dish Network Solo 351 Control Other Devices with the Remote Controls, Set Up the Remote Control

Control Other Devices with the Remote Controls

Set Up the Remote Control

1.Turn the device on.

2.Find the brand name of the device in the tables starting on page 113.

3.Press and hold the mode button until all the other mode buttons light up, and then let go of the button.

The mode button flashes.

If you are repeating this procedure to program a combination device, be sure to press the correct mode button (for example, if you have a TV/VCR combination and you have already programmed the remote to control the TV, press and hold the VCR mode button as described above).

4.For AUX mode only:

•Press 0 for a second TV.

•Press 1 for a second VCR or DVD player.

•Press 2 - for a tuner or amplifier.

5.Enter one of the three-digit device codes from the table using the number buttons.

6.If you want to program limited mode, press 1. If not, skip to step 7.

7.Press the POUND (#) button.

8.Press the blank POWER button to turn off the device. If the device does not turn off, go to step 10.

Use the device’s front panel buttons or its remote control.

If the brand isn’t listed, see Scan for Device Codes on page 74.

For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.

This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 5.

The three-digit device code should be for the brand name of your device that you found in step 2.

See Limited Mode for more information.

If you entered the code correctly, the mode button flashes three times.

If the code works, the device should turn off.

Page 73