Chapter 3
Using the System
9.Turn the device back on and try some other appropriate buttons to make sure they work. If the code works for other buttons, stop here.
Sometimes the blank POWER button works when other buttons don’t.
10.If the code doesn’t work, redo steps 3 through 9 with another device code from the tables.
11.If you can’t find a code that works try Scan for Device Codes that follows.
Scan for Device Codes
Try every code listed for you brand until one works for your device.
If the code for your device is not listed in the tables starting on page 113, use this procedure to scan the remote control’s memory for the device code.
1. Turn the device on.
Use the device’s front panel buttons or its remote control.
2.Press and hold the mode button until all the other mode buttons light up, and then let go of the button.
The mode button flashes.
For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.
3.For AUX mode only:
•Press 0 for a second TV.
•Press 1 for a second VCR or DVD player.
•Press 2 - for a tuner or amplifier.
This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 4.
4. For AUX mode only: Press the STAR (*) button.
5.Press the blank POWER button.
6.Press the UP or DOWN ARROW button repeatedly until the device turns off.
This puts your remote in the scan mode.
As you press the UP or DOWN ARROW button, the remote is trying each code in the memory to see if it can turn off your device. When the device turns off, you have found a code that might work.
Note: The mode button for the device will flash rapidly eight times when you’ve scanned all the codes for that device.
Page 74
