System Updates
•If the telephone line is not connected properly, the receiver displays a failure message. In this case, check the telephone connection and then repeat the test.
Note: If you have the receiver connected to a DSL (Digital Subscriber Line) phone line, it may cause this test to fail. If so, you will need to install a DSL filter between the receiver and the phone jack on the wall. You should be able to get a DSL filter from your DSL provider, or your local electronic parts store.
System Updates
Your receiver includes a feature that allows you to set the time in which your receiver downloads Program Guide information. When the Updates feature is enabled, the receiver will shut off every day at the same time receive a software update. The default time for this feature is 3:00 a.m.
1.Press the MENU button.
2.Select System Setup.
3.Select Installation.
4.Select Updates.
5.Highlight the Activation field.
6.Press the UP or DOWN ARROW button to enable or disable the automatic update feature.
Note: If you disable this feature, no new Program Guide information will be available until the you turn off the receiver.
7.Highlight the Time Set field.
8.Use the NUMBER PAD buttons to set the time that you want the system to update the Program Guide.
9.Highlight the AM/PM field.
10.Press the UP or DOWN ARROW button to set AM or PM.
Page 83
