Dish Network Solo 351 manual Using Locks, How to Set Locks a Two Step Process

Chapter 3

Using the System

3.At the Search History screen, you have the following options:

•Search - Select one of the items and then select Search.

•Edit - Select one of the items and then select Edit to make changes.

•Delete - Select one of the items and then select Delete.

•Delete All - Select Delete All to clear the Search History.

Using Locks

When you unlock programming delivered by the TV2 outputs to your in-home cabling system, you are allowing all TVs connected to your in-home cabling system to have access to this programming. In this case, you must rely on the V-Chip technology and settings in the individual TVs to prevent viewing of inappropriate programming. Consult your TV user’s guides for instructions to set up V-Chip protection.

Note: Locks for programming on the TV1 outputs for the nearby TV are set using the TV1 menus. Locks for programming on the TV2 outputs to remote TVs are set using the TV2 menus. The section below applies to locks set by either TV1 or TV2 menus. Locks set for TV1 programming are separate from locks set for TV2 programming.

How to Set Locks: A Two Step Process

1.Create the locks that you want.

2.Lock the receiver.

When the receiver is locked, anyone who wants to access locked items must enter the password.

When You Have Locked the Receiver

•If you try to access a locked item or open the Locks menu, the receiver displays a message prompting you to enter the password.

•The receiver allows you three tries to enter the correct password. If you fail to enter the correct password, the receiver does not allow more tries for several minutes.

•If you enter the correct password, you can access the locked item or open the Locks menu.

•If you exit a locked item or close the Locks menu, you must enter the password to access the item.

Page 62