Chapter 2

Receiver Description and Installation

Tip: The six coaxial connections on the back of your receiver are color coded to make the connectors easy to identify. Inside the front cover of this guide are stickers that are color coded the same way as the coaxial connections. See the installation instructions starting on page 19 for information on how to use the stickers that go on the coaxial cables.

Receiver Back Panel

The receiver connections on the back panel are placed in three groups:

TV1 Connections - Use these connections with the nearby TV.

TV2 Connections - Use these connections with the remote TV(s).

Other Connections - Use these connections with the dish antenna, UHF antenna, and phone line.

TV1 Connections

The following connections provide TV1 menus and programming to the nearby TV.

TV CH 3-4 OUT

The CH 3-4 OUT connection provides good quality video and mono (non-stereo) audio to your nearby TV. Use a coaxial cable to make the connection. The CH 3–4 OUT connection is color coded white.

RCA Out

The RCA audio/video outputs provide high quality picture and stereo sound to the nearby TV (if your TV has these connections). Use an RCA-type cable assembly to make the connection. If the TV has only one input for this type of audio, connect it to the right (R) phono (RCA) audio output on the receiver.

Page 14

Page 18
Image 18
Dish Network Solo 351 manual Receiver Back Panel, TV1 Connections, RCA Out