Control Other Devices with the Remote Controls
7.Press the POUND (#) button.
8.Turn the device back on and try some other appropriate buttons to make sure they work.
9.Repeat this procedure until you’ve tried all the codes.
This stores the code you found.
Press the blank POWER button to turn the device back on. Try some other buttons to make sure they work. Sometimes, the blank POWER button works when other buttons don’t.
You may need to repeat the scan to find the best code for your device.
Check the Device Codes
You can find out what device code you’ve set for each remote control mode.
1.Press and hold the mode button until all the other mode buttons light up, and then let go of the button.
The mode button flashes.
2.Press the POUND (#) button twice.
Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero.
3.For AUX mode only. The first group of flashes tells you what the AUX mode controls. A quick flash (zero) before the
For example, hold the TV mode button for a TV until all of the other mode buttons light. When you let go, the TV mode light will flash.
For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.
For example, if the TV code is 570, the AUX mode button flashes once quickly (indicating 0 for TV), pauses, flashes five times, pauses, flashes seven times, pauses, and flashes once quickly.
Tip: Remote Control 1 is used to control TV1 menus on the nearby TV. Remote Control 2 is used to control TV2 menus on the remote TV(s).
Page 75
