Efficient Networks 5100 Series manual Contacting Technical Support, Post Failure red pwr LED

SpeedStream Router User Guide

POST Failure (red pwr LED)

POST is the router’s “power-on self-test.” When you power on or reboot the router, the pwr LED goes to a solid red until one of two things occurs: it either fails its initial POST tests, or it comes fully up and is ready to run.

•If POST passes, the router continues through the rest of its initialization, and the pwr LED changes to solid green.

•If the initial POST diagnostic tests fail, the pwr LED will remain red, indicating a POST failure, and will lock the router. You will need to contact Efficient Networks Technical Support to resolve this issue.

Contacting Technical Support

If you still cannot resolve the issue after following the recommended troubleshooting procedures, contact Efficient Networks Technical Support.

Telephone: +1 (888) 286-9375

Fax: +1 (972) 852-1001

Email: support@efficient.com

Internet: http://www.support.efficient.com

92