SpeedStream Router User Guide
Step On this window: Do this:
session, steps 7-11 will repeat.
10 User Information Enter user name and password (both are optional).
11 PPP Options Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
12 PPP Static IP Enter static IP address (optional).
13 Interface Options Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
14 Connection Name Enter name to use for this connection. If multiple sessions were selected,
repeat steps 7-11 until last session is configured; then go to step 6.
15 VC Wizard Finish.
5e. If you selected the PPPoA protocol:
Step On this window: Do this:
5e User Information Enter user name and password (both are optional).
6 PPP Options Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
7 PPP Static IP Enter static IP address (optional).
8 Interface Options Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
9 Connection Name Enter name to use for this connection.
10 VC Wizard Finish.
113