SpeedStream Router User Guide
4: Getting Started
By this point, you should have completed the following:
•Connected the router.
•Verified that the TCP/IP protocol is installed on all computers in your network. (If you need to install TCP/IP, refer to your system documentation or Windows Help.)
•Configured the network settings on those computers.
You can now easily configure the SpeedStream router from the convenient
For information on navigating the Web interface, please see page 17, Navigating the Web Interface.
Logging On/Off the Web Interface
The first time you log on to the Web interface, you will be required to enter a system password in the Administrative User Setup window before you can access any other configuration windows. You may also change the user name from the default setting of admin. After your initial log on, the System Summary or PPP Login [Choose Connection] window will display, depending on your connection.
Important! If you are logging in on a
Accessing the Web Management Interface
To open the SpeedStream Web management interface, enter the default router IP address in your Microsoft Internet Explorer Address bar or Netscape Navigator Location bar:
http://speedstream
Depending on whether this is your first or a subsequent login, one of the following windows will display:
•If this is your first login, the Administrative User Setup window displays.
•If you have previously logged in, the System Summary window displays.
Logging in for the First Time
1.In your Microsoft Internet Explorer Address bar or Netscape Navigator Location bar, enter the default router IP address: http://speedstream
The Administrative User Setup window displays.
14
