SpeedStream Router User Guide

USB Installation Method

Ensure that your computer meets the minimum requirements for USB installation.

Make sure the router is not plugged in to the electrical outlet.

Connect the USB cable to the USB port at the rear of the router.

Connect the other end of the USB cable to the USB port on your computer.

Plug the telephone cable into the DSL port on the router.

Plug the other end of the telephone cable into the telephone jack.

Note If using the two-to-one adapter, plug the cable into the open socket.

Plug the router power adapter into the router and then into the electrical outlet.

Note The Plug and Play process for installing the USB drivers begins as soon as you turn on your computer and it discovers the router. To install the USB drivers, insert the SpeedStream CD-ROM and follow the on-window instructions.

You can now configure the TCP/IP settings as detailed on page 9 in Chapter 3, Configuring Computer Network Settings.

8

Page 18
Image 18
Efficient Networks 5100 Series manual USB Installation Method