Efficient Networks 5100 Series manual Configure RFC-2684 Routed Protocol

SpeedStream Router User Guide

-NAT & NAPT:

Enable concurrent NAT and NAPT

Note Depending on your configuration, NAT is sometimes enabled by default. Disable NAT only in advanced situations where your ISP has assigned static IP addresses.

2. To continue to the Connection Name window, click Next.

Specify Connection Name

1.On the Connection Name window, enter a name for the new connection.

2.To complete the configuration process for the RFC-2684 Bridged protocol, click Next.

The VC Wizard window displays.

Finish

•On the VC Wizard window, click Finish.

The Current Configuration window displays the new connection in the first available row.

Configure RFC-2684 Routed

Protocol

RFC-2684 Routed is an IP-driven protocol

with different encapsulation than RFC-2684 Bridged, but does route traffic. Since this protocol does not support DHCP, the IP address must be manually entered.

•On the Protocol Selection window, click RFC-2684 Routed; then click Next. The 2684 Routed window displays.

Enter IP Information

1.On the 2684 Routed window, enter the IP address and subnet mask. You may also enter the [optional] default gateway and DNS server addresses.

2.To continue to the Interface Options window, click Next.

Select Interface Options

1.On the Interface Options window, select the desired options:

36