|
|
| SpeedStream Router User Guide |
|
|
|
|
If you selected: | Go to: | If you selected: | Go to: |
Client | pg. 38 | 2684B Connection | pg. 43 |
Bridge | pg. 41 | PPPoE Bridge | pg. 47 |
Configure PPPoE / Client Only
This mode terminates the PPP traffic and passes on pure Ethernet to the LAN.
•On the PPPoE Type window, select Client only. The PPPoE Session Count window displays
Select PPPoE Session Count
•On the PPPoE Session Count window, select from 1 to 4 connections; then click Next.
The User Information window displays.
Note The process will repeat for each session you need to configure. After you have completed the settings for the last session, the VC Wizard window displays.
Enter User Information
1.On the User Information window, you can enter a new login username and password (not required).
2.To continue to the PPP Options window, click Next.
Select PPP Options
1.On the PPP Options window, select one or multiple setting(s):
•Dial-up Only:
Only active when you manually connect.
•Autoconnect on Disconnect:
If the connection gets dropped (line error, router reboot, DSL line drop, etc.), the PPP client automatically attempts to reconnect as soon as the error is resolved. This is like an “always on” WAN connection.
39
