
SpeedStream Router User Guide
Enter Static IP Address
1.On the PPP Static IP window, you may enter a static IP address if your service provider has assigned one (not required).
2.To continue to the Interface Options window, click Next.
Select Interface Options
1.On the Interface Options window, select the desired options:
•Use Firewall:
Enable firewall protection.
•Use Attack Detection System: Enable WAN attack protection.
•Use Universal Plug-n-Play:
Enable devices to discover and control each other via UPnP over the network.
•RIP:
Routing Information Protocol (For more information, see page 83.)
-Version 1:
Allows RIP version 1 to be transmitted/received on the selected interface. Currently, RIPv1 is seldom used, but supported on the SpeedStream router.
-Version 2:
Allows RIP version 2 to be transmitted/received on the selected interface. This would be the most common choice.
-Versions 1 & 2: Simultaneously supports RIP versions 1 and 2 on the selected interface.
-Active Mode:
In enabled, the router will receive routing updates on the selected
interface and will broadcast regular routing updates to other routers. If not enabled (default), the router will receive routing updates on this interface, but will not broadcast routing tables.
•NAT/NAPT:
Enable Network Address Translation (NAT) and/or Network Address Port Translation (NAPT). For more information on using NAT and NAPT, see page 65.
51