SpeedStream Router User Guide
Note Depending on your configuration, NAT is sometimes enabled by default. Disable NAT only in advanced situations where your ISP has assigned static IP addresses.
2.To continue to the Connection Name window, click Next.
Specify Connection Name
1.On the Connection Name window, enter a name for the new connection.
2.To continue to the PPPoE Session Count window, click Next.
The VC Wizard window displays.
Select PPPoE Session Count
•On the PPPoE Session Count window, select from 1 to 4 connections; then click Next.
The User Information window displays.
Note The process will repeat for each session you need to configure. After you have completed the settings for the last session, the VC Wizard window displays.
Enter User Information
1.On the User Information window, you can enter a new login username and password (not required).
2.To continue to the PPP Options window, click Next.
Select PPP Options
1.On the PPP Options window, select one or multiple setting(s):
•Dial-up Only:
Only active when you manually connect.
•Autoconnect on Disconnect:
If the connection gets dropped (line error, router reboot, DSL line drop, etc.), the PPP client automatically attempts to reconnect as soon as the
45
