SpeedStream Router User Guide
Clone a Rule Definition
You can create a new set of custom IP filter rules from one of the existing preconfigured firewall levels.)
1.In the Clone Rules Definitions box, select the firewall level to copy.
2.Click Clone Rule Set. The Rules table refreshes to display the new rules for that level.
3.If you want to change any of a rule’s
criteria, click Edit in the row of that rule, and then complete steps 1 through 5 as relevant (refer to the following section for detailed instructions.)
Create Custom IP Filter Rules
You can create a new filter rule based on criteria you enter.
Note You must have selected the Custom firewall level from the Firewall – Simple Setup window.
The following instructions reference the step numbers on the Firewall – Custom IP Filter Configuration window.
Step 1: Fill in the following information.
1.In the Rule No. text box, enter an unused rule number. If you enter a number that is already in the rules database, an error message will display.
2.In the Access
3.In the Direction
4.To prevent the firewall from creating a stateful inspection session for packets matched on this rule, select the Keep stateless check box.
Step 2: Define the source and destination.
1.In the Network Interface list under the Source heading, select the Network Interface.
2.Designate whether the source is any IP address or a specific address; if the latter, enter the IP address and netmask.
3.Repeat the previous steps to specify the Destination criteria.
71
