INSTRUCTION
HANDBOOK
11.Machine operation
01201138 | 0107 | 46 |
|
|
|
Notice | Date | Page |
|
|
|
11
Set tare to a certain value (for machines with weighing equipment installed only)
SERVICE PROGRAM
MAKE A CHOICE :
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
SELECT
Press three times to high- light "SET TARE TO A CER-
TAIN VALUE".
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
ZERO CALIBRATION
READ VERSION NUMBER
EXIT
Set tare to a certain value
This function lets you enter a value for the tare pa- rameter, i.e. a weight value which the weighing equip- ment will disregard when showing a net weight on the display. The function will automatically clear any earlier tare value when you enter a new one.
If your value is not entered successfully at this point, you will see an error message equivalent to : "FAILED. PRESS SELECT" on the display. For troubleshooting, see the section
SELECT
Press SELECT.
SCALE ADJUSTMENTS
SET TARE TO A CERTAIN VALUE
ENTER TARE IN HG AND
PRESS SELECT
SELECT
1 2 3
4 5 6
7 8 9
0
SELECT
Use the numeric key to enter the tare you require, unit : hectograms ; (1 hectogram =
100grams).
Press SELECT.
SCALE ADJUSTMENTS This screen shows that the parameter has been entered successfully.
SELECT
SELECT Press SELECT.
