INSTRUCTION
HANDBOOK
11.Machine operation
01201138 | 0107 | 14 |
|
|
|
Notice | Date | Page |
|
|
|
11
Rapid advance
To terminate a program before it has finished
991 NORMAL 95 °C STD
PROGRAM STEP : MAIN WASH | 1 | |
STEP TIME : | 720 SEC | |
SET TEMPERATURE : | 85 °C | |
ACTUAL TEMPERATURE : | 21 °C | |
REMAINING TIME : | 70 MIN | |
DRUM SPEED : |
| 48 RPM |
RAPID ADVANCE :
PAUSE
SELECT
STEP TIME
SET TEMPERATURE
RAPID ADVANCE
PAUSE
MANUAL FUNCTIONS
TEXT
SELECT NEW WASH PROGRAM
CHANGE °F/°C
AUTO RESTART
During program operation the display will look this (see section « To start the wash program »).
Check that « RAPID ADVANCE » is highlighted.
•Select RAPID ADVANCE and press SELECT. Advance to "END OF PROGRAM" and press SE- LECT.
•Wait until "THE DOOR IS OPEN" appears on the display.
•Now the door can be opened.
If it is not highlighted :
Press or one or more times to highlight « RAPID ADVANCE ».
SELECT Press SELECT.
991 NORMAL 95 °C STD
RAPID ADVANCE
PREWASH | 1 |
EXTRACT | 1 |
MAIN WASH | 1 |
EXTRACT | 2 |
RINSE | 1 |
SELECT
Press
or one or more times to highlight the program step you wish to advance to.
PREWASH | 1 |
EXTRACT | 1 |
MAIN WASH | 1 |
EXTRACT | 2 |
RINSE | 1 |
EXTRACT | 3 |
RINSE | 2 |
EXTRACT | 4 |
RINSE | 3 |
EXTRACT | 5 |
END OF PROGRAM |
|
SELECT Press SELECT.
Rapid advance works in both directions
Rapid advance works in both directions, using ( ) and ( ).
Using rapid advance to move forwards allows you to skip one or more program steps. Using rapid advance backwards allows you to repeat one or more program steps.
Automatic return to normal display
Once you have selected any of the functions below, you must make any changes required within 20 sec- onds. If no further keys are pressed within 20 seconds, the display will revert automatically to its normal ap- pearance during a wash program.
